Bullet proof doors
Need the ultimate in safety and security doors for your property? You’ve found them. Providing the very best security ratings, the FB4 door is resistant to 9mm handgun shots and is available as a single or double set complete with bullet proof glass and opening inwards or outwards as desired.
Doors for jewellery shops
Secure house bullet proof doors are certified for jewellery shops. Get in touch with us if you need help choosing the right door for you.
Steel Security Doors – Security Class
Secure House Standard 3
It is burglar resistant door that will protect from a skilled burglar using heavy-duty burglary tools. Its construction was created applying the knowledge of all possible ways and methods of burglary. Burglar resistanceof the security door Secure House Standard 3 was tested and approved by the laboratory IFT Rosenheim,Germany, and was awarded the 3d security class WK3 according to ENV 1627 standard. The locks installed in this door model must be no lower than 5th security classand a drill resistance plate must protect one of the locks. Secure House Standard 3 is distinguished by excellent sound and thermal insulation and therefore is suitable for both private houses and apartments.
The finish of the door is suitable for outdoors as it’s made of waterproof, certified engineered wood -MediteTricoya EDMthat retains its characteristics even after mechanical damage. The board is painted in polyurethane paint that does not discolor for many years. The door Secure House Standard 3is fire resistant and can open inwards or outwards.
It is recommended to use galvanized steel RUUKKI for entrance door construction.
Standard door set:
1.Door frame – bent L-shaped profile of 100 mm, fixed in the door aperture by 16 pins, protected from cutting by steel sleeves of 24 mm. Complete thermal insulation by rock wool or foam.
2. Door leaf – special bent metal construction with 100% thermal insulation by 50 mm rock wool. Total width of the leaf is 75 mm. Locks are protected with the steel boxes.
3. Reinforced, adjustable hinges with supporting bearings, covered with chrome-plated finishing caps – 3units.
4. Protective pins for door hinges (16 mm Ø) – 4 pieces.
5. Insulation seals – 2 units.
6. Spy-hole 22mm.
7. Externaldoor leaf finish is painted MediteTricoya EDM board.
8. Internal door leaf finish is painted Humidax – humidity resistant board.
9. Internal and external architraves are included.
10. Main lockshould be no lower than 5th security class.
11. Main lock is protected by drill resistant plate.
12. Steel tubes protecting the main lock three directional rods.
Door characteristics
Security
Specially bent L-shaped 100 mm wide doorframe is not only wider than that of ordinary armoured door, but also has six bending edges and thus is stronger than rectangular frames, which have only four bending edges. Moreover, the frame is fixed in the aperture by 16 plugs, which are protected from cutting by steel liners of 24 mm.
Internal door leaf construction is reinforced by rigid edges that do not allow deforming the door easily during burglary. One of the locks installed in this door model must be no lower than 5th security classand protected by a drilling resistant manganese plate. All locks are installed in protective steel boxes, and a separate protective sleeve secures each pin in the frame.
Secure House Standard 3 hinges are reinforced and adjustable. On the hinges side there are 4 protective pins (16 mm Ø) that do not allow dislodging the door leaf if the hinges are cut.
The locks can be replaced without disassembling the door, so it is easy and fast.
Saves the heat in your home
Bent profile leaf structure does not have closed cavities, it can be completely thermally insulated by 50 mm rock wool.The L-shaped bent frame and threshold ensure exclusive tightness as an additional seal is applied to the entire perimeter.
Thermal transmittance of Secure House Standard 3 is 1.3 W/(m2–K),i.e. Alike 6-chamber plastic windows (the lower the transmittance, the more heat is held in). Therefore, this door is suitable not only for an apartment, but also for a private house (using the materials suitable for outdoor conditions).
Tight, good heat and sound insulation
Due to the above mentioned full thermal insulation of the door structure, the sound insulation of the door Secure House Standard 3 is (41 dB). This door is especially tight and therefore, perfectly prevents the odours and smoke from the outside.
Fire resistant
With additional fire resistant components Secure House Standard 3 can protect from fire for as long as 45 minutes and withstand the temperature of 1000ºC. Certificate was issued by Inspecta Estonia OU, No. 1527-CPD-0017. The boiler room doors of private houses already have to meet fire protection requirements. The fire can also spread from the garage.
Durable and lasting, convenient to use
All security doors from Secure House are manufactured by especially precise programmed machines “Amada”, which can process metal with the precision of 0.1 mm, therefore, their construction is precisely accurate and straight. As hinges with supporting bearings are used, the doors are easy to open and close, despite of heavier weight characteristic to metal doors. The tests indicated that after 100,000cycles of opening and closing, the construction of the door remained completely intact.
As the internal structure of the door has no closed cavities, the entire metal construction is covered in powder coating, which ensures long-term surface protection from corrosion.
The door finish is made of waterproof materials which can be milled without bothering about bulging, flaking or losing its characteristics. The board is painted in your selected polyurethane paint that does not discolour for many years.
Under necessity, door finish can be easily replaced.
It is recommended to use galvanized steel RUUKKI for entrance door construction.
Simple to take care of
Painted door finish does not require any specific care and is easy to clean with non-abrasive cleaners.
Design possibilities
Choose a design from nearly 200 our finish carvings or we will manufacture a door according to an individual project prepared by an architect or us.
See GALLERY for door photos.
However, if higher security level is necessary, choose security doorSecure House Premium 4which burglar resistance was tested and certified in an authoritative notified scientific research laboratory IFT Rosenheim, Germany. These doors were created applying the knowledge of the above-mentioned laboratory of all possible ways and methods of burglary.
Secure House Premium 4
Secure House Premium 4 is our best burglar resistant door. Their unique and patented constructionwas created applying the knowledge of all possible ways and methods of burglary. We are proud that in the notified laboratory IFT Rosenheim,Germany, the testers tried to break this door continuously for 77 minutes using various crowbars, hammering, cutting and drilling toolsbut were not able to break them!
After these tests, the door Secure House Premium 4 was awarded the 4th security classWK4according to ENV 1627 standard. At least one of the locks installed in this door model must be no lower than 7th security class.Two drilling resistant manganese plates protect armoured, 3-direction lock. The locks are installed in protective steel boxes.
Secure House Premium 4 is distinguished by excellent sound insulation (45 dB) and protects against fire for as long as 45 minutes (EI45).
Secure House Premium 4 Could be upgraded to ballistic up to self-healing level FB7.
Secure House Premium 4 is suitable both for an apartment and private house (using the materials suitable for outdoor conditions). The door can be single or double, opened inwards or outwards.
Structural features of resistance:
1. 2 drilling resistant manganese plates protect the armoured lock.
2. The bodies of the main and additional locks are installed in protective steel boxes.
3. Higher security hinges have height adjustment mechanisms.
4. On the hinge side, there are eight 16mm diameter locking points.
5. On the lock side, there are six locking points and 2 additional points directed upwards and downwards. A separate protective sleeve secures each lock pin in the doorframe.
6. The door leaf is a combined structureof: grating, steel sheet and grating again, so even if the outside grating was damaged, the door is still protected by the steel plate and inside grating.
7. Double thermal insulation: a 3 cm layer of rock wool on both sides of the steel sheet. It provides excellent noise and thermal insulation for the door.
8.Finishing boards whose colour and design can be customized covers the entire ultra strong structure of the door.
9. The lock pins are protected against damage not by steel sheet, but by a 15 mm thick bent profile.
10. The frame is fixed in the opening by 17 pins, protected by steel liners of 24 mm.
Standard door set
1. Door frame – bent L-shaped profile of 115 mm, fixed in the door aperture by 17 plugs, protected from cutting by steel liners of 24 mm. Complete thermal insulation by rock wool or foam
2. Door leaf – special patented triple metal construction with 100% thermal insulation by two 30 mm rock wool sheets. Total width of the leaf is 91 mm.
3. Reinforced, adjustable hinges with supporting bearings covered with chrome-plated finishing caps – 3units.
4. Protective pins for door hinges (16 mm Ø) – 8 units.
5. Insulation seals – 2 units.
7. External door leaf finish is painted MediteTricoya EDM board.
8. Internal door leaf finish is painted Humidax – humidity resistant board.
9. Internal and external architraves are included.
10. Main lock must be no lower than 7th security class.
11. Main lock is protected by two drill resistant Manganese plates.
12. Steel tubes protecting the main lock three directional rods.
Door characteristics
Safe
Specially bent L-shaped 115 mm wide door frame is not only wider than that of ordinary armoured door, but also has 8 bending edges that reinforce the frame. The frame is fixed in the aperture by 17 plugs, which are protected from cutting by steel liners of 24 mm. Internal leaf construction is reinforced by rigid edges that do not allow deforming the door easily during burglary. At least one of the locks installed in this door model must be no lower than 7thsecurity class.The locks are installed in protective steel boxes. 2 drilling resistant manganese plates protect the armoured lock and a separate protective sleeve in the doorframe protects each lock pin.
Excellent sound insulation and shutting out the odours
Due to full thermal insulation of the door structure by 60 mm rock wool, the sound insulation of the door Secure House Premium 4 is 45 dB.
This door is especially tight and therefore, perfectly shuts out the odours and smoke from the outside.
Fire resistant
With additional fire resistant components Secure House Premium 4can protect from fire for as long as 60 minutes and withstand the temperature of 1000ºC. The tests were carried out and the certificate NR. 271 36831 was issued in IFT Rosenheim (Germany) testing laboratory. Fire resistance is especially relevant in apartment buildings, where fire can spread from the neighbours or when the door is set on fire, and in private houses – from the boiler room or garage.
Durable and lasting, convenient to use
All security doors from Secure House are manufactured by especially precise programmed machines “Amada”, which can process metal with the precision of 0.1 mm, therefore, their construction is precisely accurate and straight. As hinges with supporting bearings are used, the doors are easy to open and close, despite of heavier weight characteristic to metal doors. The tests indicated that after 100,000cycles of opening and closing, the construction of the door remained completely intact.
As the internal construction of the door has no closed cavities, the entire metal construction is covered in powder coating, which ensures long-term surface protection from corrosion.
The door finish is made of waterproof materials which can be milled without bothering about bulging, flaking or losing its characteristics. The board is painted in your selected polyurethane paint that does not discolour for many years.
Under necessity, door finish can be easily replaced.
It is recommended to use galvanized steel RUUKKI for entrance door construction.
Simple to take care of
Painted door finish does not require any specific care and is easy to clean with non-abrasive cleaners
Design possibilities
Choose a design from nearly 200 our finish carvings or we will manufacture a door according to an individual project prepared by an architect or us.
See GALLERY for door photos.
The door is manufactured precisely according to necessary measurements.
Steel Security Doors – Design
Design possibilities
Choose a design from nearly 200 standard desigs.
Alternatively please supply your own desing prepared by an architect or yourselves.
Standard designs:
Millings:
Steel Security Doors – Locks
Fiam 678
This lock has four bolts on the side of the door and a handle latch, as well as a bolt at the top into the door frame and another at the bottom into the threshold to ensure complete security for your door. The euro profile cylinder is protected with a drill resistant defender so it is impossible to drill into.
This lock is locked by two key turns from either inside or outside the door.
The lock is security class 7 by EN 12209 standard.
Mottura 85771
This lock has four bolts on the side of the door and a handle latch, as well as a bolt at the top into the door frame and another at the bottom into the threshold to ensure complete security for your door. The euro profile cylinder is protected with a drill resistant defender so it is impossible to drill into. This lock has a self destruct mechanism so if the key cylinder is broken (for example during a break-in) the internal red plate in the lock falls down into the lock and blocks the lock’s bolts which become immovable.
This lock is locked by two key turns from either inside or outside the door.
The lock is security class 7 (the highest security class) by EN 12209 standard.
Assa 565
This lock has a single bolt on the side of the door and a handle latch. The profile cylinder is Scandinavian and the interior of it has drill resistant pins which protects it from being drilled into.
This lock is locked from the outside with a key turned at a 90º angle, from the inside it’s locked using a thumbturn.
Combination of two locks: Assa 565 and FIAM 672
We recommend you use two locks. A simple bolt with the handle latch (Assa 565 which gives security class 2 by EN 1627 standard) is operated with a thumbturn from inside and a key externally. A top lock (FIAM 672 or Mottura) bolts into the side, top and bottom of the door and gives security class 3 or 4 by EN 1627 standard depending on door type. You can easily secure your house while you’re at home with a simple 90 degree thumbturn on the inside of the front door. When you’re leaving your property you can use the second lock operated externally with a key to completely secure your front door.
FIAM X1R Electronic locks
This lock has four bolts on the side of the door and a handle latch, as well as a bolt at the top into the door frame and another at the bottom into the threshold to ensure complete security for your door. The euro profile cylinder is protected with a drill resistant defender so it is impossible to drill into.
The door automatically locks itself when the door is closed. The door can be opened externally with an electronic fob from 2cm away or with a key, and can be opened from the inside with the press of a button. The button can be located either on the door or an extension can be added anywhere in the house.
The lock is security class 7 by EN 12209 standard.
Extra options
Mottura chain:
Additional set of bolts